+49-89-96098-0
inquiry@perceptron.de
Vollautomatische Messtechnik-Lösungen
Stellenangebote

Gantry CMMs

Home Solutions Coordinate Measuring Machines Gantry CMMs
MCT NT

The MCT NT series is characterized by an innovative mechanical design that guarantees the maintenance of metrological performance over time, reducing the costs of periodic calibrations.

The MCT NT is also available in the NT LIGHT configuration, that is a CMM equipped with a Z-spindle in light aluminum alloy and a “Single Read” system on x-axis.

Features

  • Main crossbar y in light aluminum alloy for maximum rigidity and minimum mass in movement
  • Z-spindle in Silicon Carbide : the use of this material guarantees exceptional performance in terms of rigidity and thermal stability
  • Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
  • “Dual Read” system on both side members X , allows the maintenance of excellent metrological performance up to cross-sections of 2500 x 1800 mm
  • Spars (X axis) with controlled expansion
  • Optical lines with free high-resolution expansion system (0.1µm)
  • It can be equipped with a complete system of fairings and bellows on the main mobile structure (X / Y axes)

Environment

  • Temperature range for metrological specifications :
    Ambient temperature: 18 ÷ 22 ° C
    Maximum hourly gradient: 1.0 ° C / h
    Maximum daily gradient: 2.0 ° C / 24h
    Maximum gradient in volume: 1.0 ° C / m
  • Operating temperature : 15 ÷ 35 ° C
  • Relative humidity for operation : 40 ÷ 80% (non-condensing)
  • Allowable vibrations : (peak / peak acceleration)
    30 mm / s² between 1 and 10 Hz
    15 mm / s² between 10 and 20 Hz
    50 mm / s² between 20 and 100 Hz

Power Supplies

  • Pressure : 5.5 Bar
  • Air consumption : 150Nl / min
  • Power supply :
    230 V ± 10%; 50 Hz ± 2% (single phase)
    115 V ± 10%; 60 Hz ± 2% (single phase)

Measuring Heads and Probes

  • Manual Heads : MIH, MH20, MH20i
  • Indexable Motorized Heads : PH10T, PH10M, PH10MQ, PH20, REVO
  • Point-to-point probes: TP2, TP20, TP200
  • Analog probes: SP25M
  • Laser sensors : Perceptron Laser Scanner
  • Probe and tip change systems : Automatic change stations

Performance

Each Coord3 CMM is tested according to the UNI EN ISO 10360-2 standards.

Options

  • Multi-wire wiring
  • Manual / automatic pallet loading / unloading system
  • PC and Printer
  • Training at Coord3 center or agents
  • Installation by Coord3 staff or agents
  • Models and dimensions :
    The COORD3 MCT NT CMMs are available with the following measuring distances (YZ mm):
    20.10 / 20.15 / 25.18
MCT Starlight

The MCT SL series offers medium to large Gantry CMMs that are notable for their excellent structural stability and adaptability.

They can be configured according to the requirements of any measurement application and are available in a wide range of sizes.

The  MCT StarLight  is also available in the NT configuration, i.e. a CMM equipped with a Z-spindle in light aluminum alloy and a “Single Read” system on the x-axis.

Features

  • Generous dimensioning of the distance of the shoes for optimal mechanical rigidity
  • High rigidity main Y-cross with exclusive steel tubular design
  • Z-spindle in extruded aluminum alloy guarantees rigidity and minimizes the moment of inertia.
  • X spars with wide transverse section made of stabilized steel and equipped with a support system that allow linear expansion without induced deformation
  • X / Y axis sliding guides in epoxy resin with high resistance ground (0.4 mm roughness)
  • Measurement system with high resolution linear transducers (0.1µm) with “Dual Reader” system on longitudinal axis X
  • “Dual Drive” system on longitudinal axis X (optional, standard for travel Y = 3000)
  • Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.

Environment

  • Temperature range for metrological specifications :
    Ambient temperature: 18 – 22 ° C
    Maximum hourly gradient: 1.0 ° K / h
    Maximum daily gradient: 2.0 ° K / 24h
    Maximum gradient in volume: 0.5 ° K / m ( SL NT) – 1.0 ° K (SL)
  • Operating temperature : 15 – 35 ° C
  • Relative humidity for operation : 40 ÷ 80% (non-condensing)
  • Allowable vibrations : (peak / peak acceleration)
    30 mm / s² between 1 and 10 Hz
    15 mm / s² between 10 and 20 Hz
    50 mm / s² between 20 and 100 Hz

Power Supplies

  • Pressure : 6 Bar
  • Air consumption : maximum 300 Nl / min
  • Power supply :
    230 V ± 10%; 50 Hz ± 2% (single phase)
    115 V ± 10%; 60 Hz ± 2% (single phase)

Measuring Heads and Probes

  • Manual Heads : MIH, MH20, MH20i
  • Motorized heads : PH10M, PH10MQ
  • Indexable Motorized Heads : PH20, REVO
  • Point-to-point probes: TP2, TP20, TP200
  • Analog probes: SP600, SP25M, SP80
  • Probe and tip change systems : Automatic change stations

Performance

Each Coord3 CMM is tested according to the UNI EN ISO 10360-2 standards.

Options

  • Multi-wire wiring
  • Models and dimensions :
    The COORD3 MCT STARLIGHT CMMs are available with the following measuring distances (YZ mm):
    20.20 / 25.18 / 25.20 / 30.20 / 30.25
MCT Plus

MCT Plus is the line of large pillar measuring machines for industrial metrological applications.

The particular construction structure, the “Dual Drive” and “Dual Read” reading system on the side members limit structural deformations during movements, guaranteeing the achievement of excellent metrological performance.

The GANTRY MCT PLUS systems are distinguished in the inspections of large components, such as marine engines and marine transmissions, used aircraft structures, rotors and components for nuclear and thermal power plants and wind turbine components.

Features

  • Generous dimensioning of the distance of the pads for optimal mechanical rigidity
  • X and Y axes with rack / pinion drive system for efficient movement of the main axes
  • X spars with wide cross section made of stabilized steel and equipped with a support system on the pillars that allow linear expansion without induced stresses and deformations
  • Measurement system with high resolution linear transducers (0.1µm) and “Dual Reader” and “Dual Drive” system on longitudinal axis X
  • Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.

Environment

  • Nominal temperature : 20 ° C
  • Temperature range : 18 – 22 ° C
  • Maximum hourly gradient : 0.5 ° C / h
  • Maximum daily gradient : 2 ° C / 24h
  • Maximum gradient in the volume : 0.5 ° C / m
  • Operating temperature : 15 – 35 ° C
  • Relative humidity for operation : 40 – 80% (non-condensing)
  • Allowable vibrations :
    30 mm / s² between 1 and 10 Hz
    15 mm / s² between 10 and 20 Hz
    50 mm / s² between 20 and 100 Hz

Power Supplies

  • Pressure : 5 Bar
  • Air consumption : 100 Nl / min
  • Power supply : 230 V 50 Hz or 110 V 60 Hz (± 2% single-phase)
  • Maximum energy consumption : 10 to 1200 W

Performance

Each Coord3 CMM is tested according to the UNI EN ISO 10360-2 standards.

Options

Models and dimensions : 
The COORD3 MCT PLUS CMMs are available with the following measuring distances (YZ mm): 
20.20 / 25.18 / 25.20 / 30.20 / 30.25